Disclaimer: This following tutorial not belongs to me... I've copied it from various sites(I'm just doing the cut and paste ok???)
Standard Shinigami outfit(aka black kimono)
This is also called a shihakushou, 死覇装 literally translated as "garment of dead souls."
Here we included the more correct terms and parts to a shinigami outfit so when discussed elsewhere you'll know what parts are referred to. Instructions are further below but if you don't know these terms already please take some time to read through this.
Underkimono: white. uses a type of relatively thin fabric. also known as juban and is worn under the gi or kosode like an undershirt or wifebeater to keep the outer clothing from getting soiled since it's always easier to clean an undergarment than having to wash the whole suit every other day.
Keikogi (Gi) or Kosode: personally I don't really understand the difference, but this is the black outer part that we wear over the underkimono. There are usually slits/vents under the sleeves for this.
Hakama: the black pants that looks like a bit like a skirt (you can also make this as a skirt if you like). If you've bought a pair from a store, you can see that there are black strings (called himo) for you to tie around your waist with. In a shihakusho, however, the himo are white (therefore looks like a separate obi). If you make a hakama from scratch, be sure to use white fabric for the himo. If you have a store-bought pair, carefully remove them and attach your own white ones.
Obi: generall mislabeled as the white string that is tied around the waist like a belt. Those are called himo, as noted above. However for some special shihakushos like Soi Fong's or Kyouraku's, they have an extra piece of cloth that is usually considerably wider than the himo and has a different color and is wrapped over it for, technically, decorative use.
Tabi Socks: two-toed. it's easier to buy this online. Or you can just sew up a normal pair of socks, separating the big toe from the rest.
Waraji/Straw Sandals: this could also be bought online, or you can make your own replica of something with a more comfortable material.
Haori: the white jacket worn over the kosode/gi by captains. Every captain has a unique inner-lining color. There is also a number at the shoulder blade region in the back signifying the squad the captain is in charge of.
Here we included the more correct terms and parts to a shinigami outfit so when discussed elsewhere you'll know what parts are referred to. Instructions are further below but if you don't know these terms already please take some time to read through this.
Underkimono: white. uses a type of relatively thin fabric. also known as juban and is worn under the gi or kosode like an undershirt or wifebeater to keep the outer clothing from getting soiled since it's always easier to clean an undergarment than having to wash the whole suit every other day.
Keikogi (Gi) or Kosode: personally I don't really understand the difference, but this is the black outer part that we wear over the underkimono. There are usually slits/vents under the sleeves for this.
Hakama: the black pants that looks like a bit like a skirt (you can also make this as a skirt if you like). If you've bought a pair from a store, you can see that there are black strings (called himo) for you to tie around your waist with. In a shihakusho, however, the himo are white (therefore looks like a separate obi). If you make a hakama from scratch, be sure to use white fabric for the himo. If you have a store-bought pair, carefully remove them and attach your own white ones.
Obi: generall mislabeled as the white string that is tied around the waist like a belt. Those are called himo, as noted above. However for some special shihakushos like Soi Fong's or Kyouraku's, they have an extra piece of cloth that is usually considerably wider than the himo and has a different color and is wrapped over it for, technically, decorative use.
Tabi Socks: two-toed. it's easier to buy this online. Or you can just sew up a normal pair of socks, separating the big toe from the rest.
Waraji/Straw Sandals: this could also be bought online, or you can make your own replica of something with a more comfortable material.
Haori: the white jacket worn over the kosode/gi by captains. Every captain has a unique inner-lining color. There is also a number at the shoulder blade region in the back signifying the squad the captain is in charge of.
Here is a picture for your reference.
Have fun making your costume!^.^
Tutorial by MasterSwordette
MasterSwordette has spent time to compile up a tutorial for making the whole Shinigami outfit, and I have pasted it here for everyone to check out if it makes life any easier. Thank you!
--
This is a tutorial guide for a shinigami outfit for a novice cosplayer.
Part One - The Shirt
Step one
If you have a karate gi, get it out, you'll need it. Trim your pattern up (I will have a style of the karate Gi I mean in my gallery) from your fabric, use a little more fabric than what you'll need, because if you make it the size of the gi, it will come out too small.
Pin the fabric pieces together, such as the two front pieces, and the back. When making these pieces, make sure you leave little slits at the sides, that's what karate gi's look like.
Step two
Sew those two pieces up, leave room for seam allowance
Step three
Make the arms to your kimono just like you would any costume, but be sure to have a reference picture on hand to see how long it should be. Do not go for the character's size, because if you are small, it will not work out. Again leave room for seam allowance. under the sleeve close to the arm pits there are triangular little holes, cut those out, leaving seam allowance, for when you sew those up.
Step four
When you have your pieces to the arms cut out, pin them to the sleeve holes. Sew those on. Don't forget to hem the little triangular holes.Just be sure not to allow the fabric to scrunch around the sewing machine or become bunched underneath the seam or you will be ripping out stitches!
Step five (part 1)
With extra fabric, now you make the hem that runs up the kimono. Pin them slowly to the edge of the kimono flaps. Again, make sure there's room for seam allowance, or you will come up too short. To do the hem, simply roll the fabric underneath so that way the edge will look clean and crisp. Again, take your time. If you have to leave some parts hanging from this section, do so if it makes you more comfortable. You won't get this part in one step.
Step five (part 2)
Finish off the hem, the hardest part will be the curve around the neck.
Step Six
Hem the kimono on the appropreate parts such as the sleeves and bottom. You will need to leave a quarter of an inch room for a good hem.
Part Two - The Pants
Step one
Make sure you buy a pattern if you are a novice cosplayer, even experienced cosplayers use a pattern and they modify the item they need. If you can't find a kimono pattern, any pattern that will make the poofy pants of doom will work.
Step two
Cut out your pattern etc, and place it on the fabric. Pants are hard so forgive me if I am vague on description. Make sure the pants will be large enough to cover your rear end. This may sound funny, but it is really frusterating to have your pants come up too short and you have to throw out fabric.
Step three
Cut the fabric and pin together. Pretend they are sleeves and around the crotch seam, pin that seam as well, again leaving room for seam allowance. I will not leave the tutorial for pleats in this one, as I'm sure there will be others with the pleats. This will be a tutorial for a non pleated pant.
Step four
To get the poofy pants of doom, cut a little wider around the edge at the bottom part of your ankles in a sort of oval/circular pattern. Trust me, it will work! You may want to do a few practice runs with scrap fabrics if you are not too sure.
Step five
Sew up the pants. Now you will need the little rubber bands, but make sure they will support your pants so they stay up!
Fold the pants inside out, (along the seam bottoms) and take the fabric, and pin it so that it looks as though there is a hole. That's where the bands will go. Put a safety pin through it and scrunch it through. Sew up the seams to that. Do the same for the waist band. Your pants are now finished. Remember to take your time when sewing your pants. (and all other parts of your costume!)Pants are hard to do, and you may say some things you wouldn't repeat out of the house. Do not take my tutorial word for word, this is just that, it is designed to help you out. Have fun making your shinigami and happy sewing!! ^^
MasterSwordette has spent time to compile up a tutorial for making the whole Shinigami outfit, and I have pasted it here for everyone to check out if it makes life any easier. Thank you!
--
This is a tutorial guide for a shinigami outfit for a novice cosplayer.
Part One - The Shirt
Step one
If you have a karate gi, get it out, you'll need it. Trim your pattern up (I will have a style of the karate Gi I mean in my gallery) from your fabric, use a little more fabric than what you'll need, because if you make it the size of the gi, it will come out too small.
Pin the fabric pieces together, such as the two front pieces, and the back. When making these pieces, make sure you leave little slits at the sides, that's what karate gi's look like.
Step two
Sew those two pieces up, leave room for seam allowance
Step three
Make the arms to your kimono just like you would any costume, but be sure to have a reference picture on hand to see how long it should be. Do not go for the character's size, because if you are small, it will not work out. Again leave room for seam allowance. under the sleeve close to the arm pits there are triangular little holes, cut those out, leaving seam allowance, for when you sew those up.
Step four
When you have your pieces to the arms cut out, pin them to the sleeve holes. Sew those on. Don't forget to hem the little triangular holes.Just be sure not to allow the fabric to scrunch around the sewing machine or become bunched underneath the seam or you will be ripping out stitches!
Step five (part 1)
With extra fabric, now you make the hem that runs up the kimono. Pin them slowly to the edge of the kimono flaps. Again, make sure there's room for seam allowance, or you will come up too short. To do the hem, simply roll the fabric underneath so that way the edge will look clean and crisp. Again, take your time. If you have to leave some parts hanging from this section, do so if it makes you more comfortable. You won't get this part in one step.
Step five (part 2)
Finish off the hem, the hardest part will be the curve around the neck.
Step Six
Hem the kimono on the appropreate parts such as the sleeves and bottom. You will need to leave a quarter of an inch room for a good hem.
Part Two - The Pants
Step one
Make sure you buy a pattern if you are a novice cosplayer, even experienced cosplayers use a pattern and they modify the item they need. If you can't find a kimono pattern, any pattern that will make the poofy pants of doom will work.
Step two
Cut out your pattern etc, and place it on the fabric. Pants are hard so forgive me if I am vague on description. Make sure the pants will be large enough to cover your rear end. This may sound funny, but it is really frusterating to have your pants come up too short and you have to throw out fabric.
Step three
Cut the fabric and pin together. Pretend they are sleeves and around the crotch seam, pin that seam as well, again leaving room for seam allowance. I will not leave the tutorial for pleats in this one, as I'm sure there will be others with the pleats. This will be a tutorial for a non pleated pant.
Step four
To get the poofy pants of doom, cut a little wider around the edge at the bottom part of your ankles in a sort of oval/circular pattern. Trust me, it will work! You may want to do a few practice runs with scrap fabrics if you are not too sure.
Step five
Sew up the pants. Now you will need the little rubber bands, but make sure they will support your pants so they stay up!
Fold the pants inside out, (along the seam bottoms) and take the fabric, and pin it so that it looks as though there is a hole. That's where the bands will go. Put a safety pin through it and scrunch it through. Sew up the seams to that. Do the same for the waist band. Your pants are now finished. Remember to take your time when sewing your pants. (and all other parts of your costume!)Pants are hard to do, and you may say some things you wouldn't repeat out of the house. Do not take my tutorial word for word, this is just that, it is designed to help you out. Have fun making your shinigami and happy sewing!! ^^
And For the Hakama...
you have to download the full pdf file to get the tutorial
For Shinigami Captains Tutorial...
Yamamoto Genryuusai
Haori: long sleeved. inner lining color royal purple.
Beard: I guess you can stick a santa claus beard on? Or maybe a wig?
Soi Fong
Haori: sleeveless. inner lining color orange (not neon)
Obi: It's a yellow one worn over the standard white himo, and a bit wider as well.
Hair: a tutorial for hair extensions if that's what you want to do.
Suzumebachi (released zanpakutou): general guidelines here.
Ichimaru Gin
Haori: sleeveless. inner lining color seafoam blue or green (similar but not same to Aizen's). For a better view see ep 21 when he drives Ichigo out of Seireitei with his zanpakutou.
Unohana Retsu
Haori: long sleeved. Inner lining color reddish brown (but pretty)
Aizen Sousuke
Haori: long sleeved. inner lining color seafoam green or blue.
Kuchiki Byakuya
Haori: sleeveless, inner lining color navy blue.
Scarf: material should be something like silk or satin to emphasize its value and color should be a really light blue or green depending on preference. White is good as well.
Kenseikan: same color as the scarf, could be made with craft foam and clips. You can check out the manga chapter 56 or so to see the back of his head and how he does his hair. Here is a suggestion from the props forum as well.
Tekko: This could be any type of fabric, depending on your preferences. Memories of Nobody has a few nice shots of the tekko so you can get an idea of what it's like. Many fanarts draw it really well too.
Komamura Sajin
Haori: sleeveless. inner lining color brownish yellow.
Armor: Could be made with pleather...
Helmet: here is a thread that may be helpful.
Fox Head:
Shunsui Kyouraku
Haori: long sleeves. inner lining color red.
Straw Hat: you can try assembling this from scratch...You can also just buy it online.
Robe: This should be just like his haori, so follow the guide in which you used for your haori and substitute the fabric.
Obi: Over the himo he ties a large blue scarf. Some of the SS episodes show this pretty well.
Tousen Kaname
Haori: sleeveless. inner lining color golden (but not the bright kind please)
White Boots: can be bought or made with pleather.
Orange scarf: You can knit this or buy it..
Other: keep in mind his gi should be sleeveless.
Hitsugaya Toushirou
Haori: sleeveless. inner lining color deep green/emerald.
Bankai Wings: Thread of suggestions
Zaraki Kenpachi
Haori: sleeveless with ripped edges. inner lining color dark purple.
Hair: Please check here for a tutorial and recommended gel.
Choker: you can just buy a similar one and embroider or fabric-paint the edges. Whatever suits you best.
Kurotsuchi Mayuri (many thanks to DeathCow for his detailed guide as follows)
Haori: long-sleeved. inner lining color dark (grayish) green.
Hat: Cut the bill off of a baseball cap, use oaktag and buckram/interfacing to make the new bill and the border part.
Mask: plaster wrap using your face as a mold (it might be smart to seal it with something like gesso too so it doesnt wear and tear down), superglue 3 drinking cups you're willing to butcher. Cut out the teeth and glue white cloth on the inside of the mask to give his lips' definition.
Detonator (the one he used for setting his subordinates on fire in the SSArc): craft foam, silver, black, and green paint (careful what kind of glue is used cuz some may eat through the foam)
Extending Left Arm: plaster wrap your own hand in a creepy pose and let sit. carefully cut around your hand so it can be slipped off and then repair cuts with more wrap. Super glue it on end of a pole, wash rinse repeat for the wrist component and slide it on to the middle. Cut up some clothes hangers, paint silver and super glue them connecting the wrist and handpiece. Take tiny bits of plaster wrap and secure ends of wires.
Sealed Zanpakuto: use foam/fiberglass resin tutorials, make sure you make the handle slightly bigger than the blade. Take any kind of clay, evenly spread, roll it out to about a half inch or a little more in thickness, trim the shape out using a paring knife making sure to note that one side is actually indented. Use newspaper to brace it up in the oven while you bake it. Paint, noting where there are screws on his guard, and either provide your own wrap, or paint one onto the hanging part which faces down when the sword is actually on the belt. Take some toothpicks, jam them in the handle near the guard and add a few drops of super glue.
Shikai: Lots of foam and fiberglass resin from the tutorial. It might be helpful to cut it in sections and then attach them before applying the resin, 3 blades, the shield, the Jizou head and the handle. I also used uncoiled clothes hangers to act as support. After the resin is done(3-4 coats) spray paint it all gold. Take some green construction paper and some contact paper (laminating) and cut out some leaf-like shapes and attach them using super glue to the handle.
Ear-Scythe: take a few feet of cloth, sew it together to kind of mimic an umbilical cord. Usually you can find some sort of scythe prop at a costuming shop, cut the handle to a proper size, run the cord up the handle and super glue it to secure it, and apply the correct paint.
Belt: His belt is pretty wide, about 8 inches. make another smaller belt that is sewn onto part of the main belt, attaching on either side of the belt but slightly towards the back, this will hold the sheath.
Ukitake Juushirou
Haori: long-sleeved, inner color dark red/royal red.
------------
Urahara Kisuke(ex-Squad #12's Captain):
Accessories: Seems to wear waraji like everyone else in this outfit. Haori is long-sleeved.
Haori: long-sleeved. inner lining dark grayish green.
Other:
Haori: long sleeved. inner lining color royal purple.
Beard: I guess you can stick a santa claus beard on? Or maybe a wig?
Soi Fong
Haori: sleeveless. inner lining color orange (not neon)
Obi: It's a yellow one worn over the standard white himo, and a bit wider as well.
Hair: a tutorial for hair extensions if that's what you want to do.
Suzumebachi (released zanpakutou): general guidelines here.
Ichimaru Gin
Haori: sleeveless. inner lining color seafoam blue or green (similar but not same to Aizen's). For a better view see ep 21 when he drives Ichigo out of Seireitei with his zanpakutou.
Unohana Retsu
Haori: long sleeved. Inner lining color reddish brown (but pretty)
Aizen Sousuke
Haori: long sleeved. inner lining color seafoam green or blue.
Kuchiki Byakuya
Haori: sleeveless, inner lining color navy blue.
Scarf: material should be something like silk or satin to emphasize its value and color should be a really light blue or green depending on preference. White is good as well.
Kenseikan: same color as the scarf, could be made with craft foam and clips. You can check out the manga chapter 56 or so to see the back of his head and how he does his hair. Here is a suggestion from the props forum as well.
Tekko: This could be any type of fabric, depending on your preferences. Memories of Nobody has a few nice shots of the tekko so you can get an idea of what it's like. Many fanarts draw it really well too.
Komamura Sajin
Haori: sleeveless. inner lining color brownish yellow.
Armor: Could be made with pleather...
Helmet: here is a thread that may be helpful.
Fox Head:
Shunsui Kyouraku
Haori: long sleeves. inner lining color red.
Straw Hat: you can try assembling this from scratch...You can also just buy it online.
Robe: This should be just like his haori, so follow the guide in which you used for your haori and substitute the fabric.
Obi: Over the himo he ties a large blue scarf. Some of the SS episodes show this pretty well.
Tousen Kaname
Haori: sleeveless. inner lining color golden (but not the bright kind please)
White Boots: can be bought or made with pleather.
Orange scarf: You can knit this or buy it..
Other: keep in mind his gi should be sleeveless.
Hitsugaya Toushirou
Haori: sleeveless. inner lining color deep green/emerald.
Bankai Wings: Thread of suggestions
Zaraki Kenpachi
Haori: sleeveless with ripped edges. inner lining color dark purple.
Hair: Please check here for a tutorial and recommended gel.
Choker: you can just buy a similar one and embroider or fabric-paint the edges. Whatever suits you best.
Kurotsuchi Mayuri (many thanks to DeathCow for his detailed guide as follows)
Haori: long-sleeved. inner lining color dark (grayish) green.
Hat: Cut the bill off of a baseball cap, use oaktag and buckram/interfacing to make the new bill and the border part.
Mask: plaster wrap using your face as a mold (it might be smart to seal it with something like gesso too so it doesnt wear and tear down), superglue 3 drinking cups you're willing to butcher. Cut out the teeth and glue white cloth on the inside of the mask to give his lips' definition.
Detonator (the one he used for setting his subordinates on fire in the SSArc): craft foam, silver, black, and green paint (careful what kind of glue is used cuz some may eat through the foam)
Extending Left Arm: plaster wrap your own hand in a creepy pose and let sit. carefully cut around your hand so it can be slipped off and then repair cuts with more wrap. Super glue it on end of a pole, wash rinse repeat for the wrist component and slide it on to the middle. Cut up some clothes hangers, paint silver and super glue them connecting the wrist and handpiece. Take tiny bits of plaster wrap and secure ends of wires.
Sealed Zanpakuto: use foam/fiberglass resin tutorials, make sure you make the handle slightly bigger than the blade. Take any kind of clay, evenly spread, roll it out to about a half inch or a little more in thickness, trim the shape out using a paring knife making sure to note that one side is actually indented. Use newspaper to brace it up in the oven while you bake it. Paint, noting where there are screws on his guard, and either provide your own wrap, or paint one onto the hanging part which faces down when the sword is actually on the belt. Take some toothpicks, jam them in the handle near the guard and add a few drops of super glue.
Shikai: Lots of foam and fiberglass resin from the tutorial. It might be helpful to cut it in sections and then attach them before applying the resin, 3 blades, the shield, the Jizou head and the handle. I also used uncoiled clothes hangers to act as support. After the resin is done(3-4 coats) spray paint it all gold. Take some green construction paper and some contact paper (laminating) and cut out some leaf-like shapes and attach them using super glue to the handle.
Ear-Scythe: take a few feet of cloth, sew it together to kind of mimic an umbilical cord. Usually you can find some sort of scythe prop at a costuming shop, cut the handle to a proper size, run the cord up the handle and super glue it to secure it, and apply the correct paint.
Belt: His belt is pretty wide, about 8 inches. make another smaller belt that is sewn onto part of the main belt, attaching on either side of the belt but slightly towards the back, this will hold the sheath.
Ukitake Juushirou
Haori: long-sleeved, inner color dark red/royal red.
------------
Urahara Kisuke(ex-Squad #12's Captain):
Accessories: Seems to wear waraji like everyone else in this outfit. Haori is long-sleeved.
Haori: long-sleeved. inner lining dark grayish green.
Other:
For Real World Characters...
Sado Yasutora:
There is a tutorial on Wonderflex above if you want to use that. Here is a thread introducing many ways and different types of fabrics you can use.
For a craft foam tutorial go here.
Inoue Orihime
It's worth buying her clips online. They're made really well~~ check the first post for where to buy accessories.
Ishida Uryuu:
Bow and arrows: you can make these with the Wonderflex tutorial on post #1. At the props forum, there are also suggestions for carboards and super gluing as well (link to be added soon).
This is for one of his cooler bows.
Relatively short coat: here is a tutorial but since it's out of print (still available) it may be quite expensive.
Another thread on his newer outfit.
Urahara
about his geta, some people enjoyed making it, while some rather buy it. Please share your information about his geta please~~ Also his hat is sold everywhere and they’re mostly pretty cheap if you don’t want to make the hat. His coat should be similar to a haori’s so you can just check those links out. I’m not sure about the rest though. His top looks like a shinigami’s keikogi/kosode as well~~
For his cane: you can buy yourself one on ebay or something or make one yourself. The bottom part, if you don't want to use whatever the product has, get some rubber stoppers from Home Depot and smooth it with sandpaper, an X-acto knife, glue and clay...then paint on the "shinigami mark" with acrylics
There is a tutorial on Wonderflex above if you want to use that. Here is a thread introducing many ways and different types of fabrics you can use.
For a craft foam tutorial go here.
Inoue Orihime
It's worth buying her clips online. They're made really well~~ check the first post for where to buy accessories.
Ishida Uryuu:
Bow and arrows: you can make these with the Wonderflex tutorial on post #1. At the props forum, there are also suggestions for carboards and super gluing as well (link to be added soon).
This is for one of his cooler bows.
Relatively short coat: here is a tutorial but since it's out of print (still available) it may be quite expensive.
Another thread on his newer outfit.
Urahara
about his geta, some people enjoyed making it, while some rather buy it. Please share your information about his geta please~~ Also his hat is sold everywhere and they’re mostly pretty cheap if you don’t want to make the hat. His coat should be similar to a haori’s so you can just check those links out. I’m not sure about the rest though. His top looks like a shinigami’s keikogi/kosode as well~~
For his cane: you can buy yourself one on ebay or something or make one yourself. The bottom part, if you don't want to use whatever the product has, get some rubber stoppers from Home Depot and smooth it with sandpaper, an X-acto knife, glue and clay...then paint on the "shinigami mark" with acrylics
And at last....
A few links for tutorial I've not mentioned above...
link 1-Kon(or other characters)pushie
link 2-wooden zanpakutou tutorial
0 评论:
发表评论